Description
Load Shedding Wifi Kit 8AH Lithium
Do you have constant power interruptions with your internet due to Load Shedding?
This simple, yet effective system can power a normal Fibre ONT Box and Normal WIFI Router for between 4 to 12 hours. These times can vary depending on charge state of battery and load on the routers. This kit includes 2 x 1m 12v DC Male Plugs for easy connections.
Please note: This is a 12v battery backup system. For lower voltages like 9v, 5v, a DC to DC Buck converter is needed to regulate the voltage lower. This is NOT included with this KIT.
PSU – Features:
- Microprocessor Controlled Charging Output
- Low Battery Switch off @ 11V DC ± 5%
- Over Voltage protection on Battery charging above 15V DC ± 5%
- Resettable Fuse Protection on DC Output
- Fuse Protection on AC input
- 50mA Quiescent Current power Failure
- ABS UL994 HB flame resistant plastic enclosure
PSU Specifications:
- Input Voltage Range: 110V ~ 230V AC 50Hz
- Output Voltage: 13V ~ 14.4V Adjustable
- Max Current output: 3A DC / 35Watts
- Relay contact rating: 10A
- AC Fail output rating: 140mA Positive switching
- Operating temp: -3°C to 60°C
- Dimensions (L x W x H): 200 x 180 x 87mm
- Gross Weight: 0.895Kg
- Warranty: 12 Months.
Battery:
- Nominal Voltage – 12V (12.8V)
- Capacity – 8Ah
- Watt-Hour – 102.4Wh
- Max Discharge Current – 8A
- Standard Discharge Current – 4A
- Max Charge Current – 8A
- Recommended Charge Current – 14.4v – 14.6v
- BMS Cut-off Low Voltage – 10.8V
- BMS Charge Cut-off High Voltage – 14.6V
- BMS Function – Overcharge, Over-discharge, Overcurrent & Temperature protection
- Dimensions (L*W*H） – 151 x 65 x 95mm
- Weight – 750g
- Terminal Type – F2 (6.35mm)
- Case Material – ABS
- Discharge Temperature – -20ºC to 60ºC
- Charge Temperature – 0ºC to 45ºC
- Operating Humidity Range 5% – 85%
This device is a 12V DC power supply unit designed to charge 12V DC Lithium batteries with a Max Amp Hour rating of 8AH
A bigger battery may result in a power supply not operating correctly.
This device can be used to charge lead acid batteries, but will be limited to charging rate of 1amp.
Kit includes the following:
- 1 x Sherlotronics 3Amp Battery Backup Power Supply Unit
- 1 x Ultra Tech 8AH LifePo4 Battery
- 2 x 1m DC Cable with Male Plug Point
Reviews
There are no reviews yet.